Planet Technology 10/100/1000Mbps Gigabit Ethernet Web-manageable Switch, GSW-1402S 3.5.3.1 Mirror Function, 3.5.3.2 Choose Sniffer Port, 3.5.3.3 Choose Monitored Port, 3.5.4 Port Aggregation

3.5.3.1 Mirror Function

To set the Mirror Function active or inactive, select 1 from Port Mirror Menu.

3.5.3.2 Choose Sniffer Port

To change current sniffer port, select 2 from Port Mirror Menu. Then enter the desired port number.

3.5.3.3 Choose Monitored Port

To change current monitored port, select 3 from Port Mirror Menu. Then enter the desired port numbers. If you want to enter two numbers, please use a comma between numbers.

3.5.4 Port Aggregation

Port Aggregation (Port Trunk) is used to increase the bandwidth of a switch-to-switch connection. GSW-1402S provides 8 port aggregation groups. Each group consists of 2 ports and creates bandwidth up to 4Gbps at full duplex mode.

To enter Port Aggregation Menu, select 4 from Device Control Menu.

This screen shows status of all aggregation groups. To modify the status of a specific group, key in the group number below, then enable or disable its function.

11