Chapter 6 INSTALLING THE CONVERTER

6.1 Stand-alone Installation

To install a GT-80X stand-alone, on a desktop or shelf, simply complete the following steps:

Step 1: Turn off the power of the device/station in a network to which the GT-80X will be attached.

Step 2: Ensure that there is no activity in the network.

Step 3: Attach fiber cable from the GT-80X to the fiber network. TX, RX must be paired at both ends.

Step 4: Connect the 5VDC power adapter to the GT-80X and verify that the Power LED lights up.

Step 5: Turn on the power of the device/station; the PWR LEDs should light when all cables are attached.

13