6.2 Chassis Installation and Rack Mounting

To install the media converter in a 10-inch or 19-inch with standard rack, follow the instructions described below.

Step 1: Place your GT-80X on a hard flat surface, with the front panel positioned towards your front side.

Step 2: Carefully slide in the module until it is fully and firmly fitted into the slot of the chassis.

Figure 6-3:Insert a media converter into an available slot

Step 3: Attach a rack-mount bracket to each side of the Chassis with supplied screws attached to the package.

Step 4: After the brackets are attached to the chassis, use suitable screws to securely attach the brackets to the rack, as shown in Figure 6-3.

Step 5: Proceed with the steps 4 and steps 5 of session

6.1Stand-alone Installation to connect the network cabling and supply power to your switch.

16