GT-805A Installation

Step 1: Connect the fiber cable. Attach the duplex LC connector on the network cable into the SFP transceiver.

Step 2: Attach fiber cable from the GT-805A to the fiber network. TX, RX must be paired at both ends.

Step 3: Connect the 5VDC power adapter to the GT-805A and verify that the Power LED lights up.

Step 7: Turn on the power of the device/station; the PWR LEDs should light when all cables are attached.

Figure 6-2GT-805A installation

It recommends using PLANET MGB-SX /

MGB-LX series 1000Base-SX/LX SFP on the Notice: converter. If you insert a SFP transceiver

that is not supported, the converter will not recognize it.

15