MAC address: Displays the Ethernet MAC address of the WLAN card. Note that user cannot change it.

Site survey: Click the “Reload” button. It will refresh information window which list is the result of a network scan. Access points with a disabled SSID Broadcast will not appear unless the camera is associated with it.

Interface Select: “Wired (Ethernet) only” or “Auto – wired if cable connected otherwise wireless”: Choose wired or wireless mode. However, note that wired is priority.

Type:

To select one of WLAN modes from Infrastructure or Ad-Hoc mode.

Security mode: Shows which type of security the network uses. The device supports three security methods: None, WEP, WPA_PSK/WPA2_PSK

WEP settings:

Authenticatio Select Open or Shared Key System Authentication,

n:depending on the method used by your access point. Not all access points have this option, in which case they probably use Open System, which is sometimes known as SSID Authentication.

WEP Mode: The key types available depend on the access point being used. The following options are available:

•ASCII - In this method the string must be exactly 5 characters for 64-bit WEP and 13

36