Planet Technology ICA-108W 2.2 Physical Description, 2.3 Hardware Installation, Note:, Note:, LAN Socket, Audio Output, 1.LAN Socket, 2.Audio Output, 3.DC Power Jack, DC 5V Power Jack

2.2 Physical Description

LAN Socket	DC 5V Power Jack
	Audio Output	Reset to Default Button

1.LAN Socket

The LAN port is a RJ-45 connector for connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of the network automatically. Please use Category 5 “straight” cable to connect the IR IP Camera to a 100Mbps Fast Ethernet network switch or hub.

Note: In case you need to connect the device to PC or notebook directly, you should use a cross-over cable instead.

2.Audio Output

Audio output jack allows this device to output audio or alerting sound.

3.DC Power Jack

The DC power input jack is located on the IR IP Camera. The input power is 5V DC.

Note: Using the power supply that is not the one included in IR IP Camera packet will cause damage and void the warranty for this product.

4.Reset to Default Button

This button is hidden in the pinhole beside the DC Power Jack. Please refer to the Appendix A in this manual for more information.

2.3 Hardware Installation

1.Attach the IR IP Camera with the included stand.

2.Locate the IR IP Camera on the table or fix it onto ceiling or wall.

3.Plug an Ethernet cable into the IR IP Camera.

4.Assemble the antenna to ICA-108W.

5.Connect the external power supply to IR IP Camera.

8