Appendix A: Reset Factory Default Settings

There is a button hidden in the pinhole near to the DC power connector. This button is used to restore the factory default settings. Sometimes restarting the ICA-108/108W will make the system back to a normal state. If the system still got problems after reset, user can restore the factory default settings and install it again.

Restore the ICA-108/108W:

1.Insert the paper clip or other tool and press and hold the button down continuously.

2.Wait at least 3 seconds and release the button. Then the ICA-108/108W has been restored to factory default settings and reboot again.

Reset to Factory Default

Note: Restoring the factory default setting will lose the all previous settings included IP address forever. User will need to run the IPWizard program to search the device and configure it to let the device work properly again.

66