|
|
|
|
|
|
| |
|
| VDSL port Enable | |
|
| Speed Mode = Auto Speed | |
| X | To exit ICD command prompt | |
|
|
|
|
| VLAN Command |
|
|
|
|
| |
| V | Show the current VLAN settings | |
|
|
| |
| VO | Set VLAN to ON *1 | |
| VF | Set VLAN to OFF | |
|
|
| |
| VG | Select the <port(s)> to belong to <group> | |
|
| The available VLAN group number is from 1 to 16. Issue this | |
|
| VG command will automatically switch the VLAN mode to | |
|
| USER DEFINED. | |
|
| Example: “VG | |
|
| member ports:1,2,3 and B. | |
|
|
| |
| VG <group> | Empty VLAN Ports group | |
|
|
|
|
| VDSL Command |
|
|
|
|
| |
| LT | Set VDSL <port> to <speed> on local(LT) end | |
|
| There are six speed levels to select from when | |
|
| setting VDSL port speed. A, B, C, D is for | |
|
| ||
|
| firmware version R2 and Q is for firmware | |
|
| version R4. | |
|
| A: Downstream 4 Mbps/Upstream 1 Mbps (R4.5) | |
|
| B: Downstream 5 Mbps/Upstream 5 Mbps (R4.5) | |
|
| C: Downstream 11 Mbps/Upstream 11 Mbps (R4.5) | |
|
| D: Downstream 15 Mbps/Upstream 17 Mbps (R4.5) | |
|
| P: Downstream 11 Mbps/Upstream 11 Mbps (R2) | |
|
| Q: Downstream 15 Mbps/Upstream 17 Mbps (R4) | |
|
| Example: “LT | |
|
| symmetric 5Mbps | |
| RT | Set VDSL <port> to <speed> on remote(RT) end | |
|
|
| |
| LR | Set VDSL <port> to preset <speed>. | |
|
| Please then issue S command if you want to save this | |
|
| settings. | |
|
|
| |
| LR <port>- | Set VDSL <port> to | |
|
|
| |
| SR <port> | Save data on remote side of VDSL <port> | |
|
|
|
|
| Port Command |
|
|
|
|
| |
| PC | Show all counters for all ports | |
|
|
| |
| PC <port> | Show all counters for <port> | |
|
|
| |
| C | Clear all counters for all ports | |
|
|
| |
| C <port> | Clear all counters for <port> | |
|
|
|
|
33