∙Supplicant Timeout – This control sets the maximum time that the AP will wait for an authentication response from a client. Once this limit has been reached, the AP will check how many times it has tried.

∙Fail Retries – This is the number of times the AP will restart the authentication process with the client before returning an error.

∙Enable Reauthentication – If this control is checked, the AP will re-initiate authentication whenever the specified amount of time has expired.

∙Enable WEP Key Delivery – If this control is checked, the AP will pass the WEP key to the client after the authentication procedure has finished. This only applies when the AP has WEP enabled, EAP-TLS is being used on the RADIUS server as the authentication method, and the supplicant has been authenticated with the RADIUS server.

Accounting Options

- 25 -