3.3.2.4 Restart

You can restart a selected WAP-5000 by opening the Host menu and select Restart, or click on the

icon . A warning message will pop up for confirmation. Click OK button to restart the device. The restart process will take about 30 seconds. During this period, the WMS program will not be able to

query the WAP-5000 via the SNMP protocol and the WAP-5000 will not be available to its client stations. If you try to access the device, the WMS program will display the message “Timeout! No response from agent.”

3.3.2.5 Factory Reset

If you want to reset the WAP-5000 to its factory default settings, you can open the Host menu and

select Factory reset, or click on the icon . A warning message will pop up for confirmation.

Click OK button to reset factory settings.

3.3.2.6 Upgrade Firmware

To upload the latest firmware to the WAP-5000, you can open the Host menu and select Upgrade

Firmware, or click on the icon . A dialog box will pop up. You may either enter the file name in

the Firmware File field or browse the file by clicking the Browse button, then click Upgrade button

to start the process.

- 30 -