Planet Technology WGD-800 “OK”, single, “port2”, multiple, multiple, Port Mode, VLAN Type, Frame Leave, 802.1Q VLAN, 802.1Q VLAN, Always Untag, VLAN Membership, Port VID (PVID)

。

Port Mode	VLAN Membership	Frame Leave
Access	Belongs to a single untagged VLAN	Untagged
		( Tag=PVID be removed)
Always Untag	Allowed to belongs to multiple untagged	Untagged
	VLANs at the same time	(Tag=PVID be removed)
Trunk	Allowed to belongs to multiple Tagged	Tagged
	VLANs at the same time	(Tag=PVID or Original VID be remained)

Port VID (PVID)

Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for accommodating devices that you want to participate in the VLAN but that don’t support tagging. The Switch allows each port to set one PVID, the range is 1~255, default PVID is 1. The PVID must be the same as the VLAN ID that the port was defined as belonging to in the VLAN group, or the untagged traffic will be dropped.

1.Select 802.1Q VLAN in the VLAN Type field and click on the “OK” button.

The main page then changes to the 802.1Q VLAN table which displays the VLAN configuration of each port.

2.If you want to configure port #2 to be in a VLAN other than default VLAN. Double click on “port2” to enter into VLAN port configuration window.