Planet Technology XRT-411 manual 70

Broadband Router User Guide

External Port No.	The port number used by Internet users when connecting to
	the Server. This is normally the same as the Internal Port
	Number. If it is different, this device will perform a "mapping"
	or "translation" function, allowing the server to use one port
	address, while clients use a different port address.
Buttons
Defaults	This will delete any Servers you have defined, and set the
	pre-defined Servers to use their default port numbers.
Disable All	This will cause the "Enable" setting of all Virtual Servers to be
	set OFF.
Update Selected	Update the current Virtual Server entry, using the data shown
Server	in the "Properties" area on screen.
Add as new	Add a new entry to the Virtual Server list, using the data
Server	shown in the "Properties" area on screen. The entry selected
	in the list is ignored, and has no effect.
Delete	Delete the current Virtual Server entry. Note that the pre-
	defined Servers can not be deleted. Only Servers you have
	defined yourself can be deleted.
Clear Form	Clear all data from the "Properties" area, ready for input of a
	new Virtual Server entry.
		For each entry, the PC must be running the
		appropriate Server software.

Defining your own Virtual Servers

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can define and manage your own Servers:

Create a new Server:	1.	Click "Clear Form"
	2.	Enter the required data, as described above.
	3.	Click "Add".
	4.	The new Server will now appear in the list.

Modify (Edit) a Server: 1. Select the desired Server from the list

2.Make any desired changes (for example, change the Enable/Disable setting).

3.Click "Update" to save changes to the selected Server.

Delete a Server: 1. Select the entry from the list. 2. Click "Delete".

Note: You can only delete Servers you have defined.

Pre-defined Server cannot be deleted.

66