Broadband Router User Guide
Physical Details
PWR
STATUS (Red)
LAN
WAN
USB
Figure 2: Front Panel
On - Power on.
Off - No power.
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
For each port, there are 2 LEDs
∙LNK/ACT
∙On - Corresponding LAN (hub) port is active.
∙Off - No active connection on the corresponding LAN (hub) port.
∙Flashing - Data is being transmitted or received via the corresponding LAN (hub) port.
∙100
∙On - Corresponding LAN (hub) port is using 100BaseT.
∙Off - Corresponding LAN (hub) port connection is using 10BaseT, or no active connection.
On - Connection to the broadband modem attached to the WAN (Internet) port is established.
Off - No connection to the broadband modem on the WAN (Inter- net) port.
Flashing - Data is being transmitted or received via the WAN port. On - Connection to printer established.
Off - No connection to printer; printer is Off or
4