4:In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing the TCP/IP protocol. You may need your Windows CD to complete the installation.

5:After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then click the Properties button.

6:Check each of the tabs and verify the following settings:

•IP Address: Select Obtain an IP address from a DHCP server.

•DNS: Let all fields are blank.

•WINS: Let all fields are blank.

•Routing: Let all fields are blank.

7:Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server.

"Please make sure that XRT-412’s DHCP server is the only DHCP server Note: available on your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3.

8