
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
3.1.3 Remote Management
The remote management function allows you to designate a host in the Internet the ability to configure
Parameters | Description |
Host Address | This is the IP address of the host in the Internet that will have |
| management/configuration access to |
| means if you are at home and your home IP address has been |
| designated the Remote Management host IP address for this router |
| (located in your company office), then you are able to configure this |
| router from your home. If the Host Address is left 0.0.0.0 this means |
| anyone can access the router’s |
| location, providing they know the password. |
| Click the Enabled box to enable the Remote Management function. |
| Note: When you want to access the |
| remote site, you must enter the router’s WAN IP address (e.g. 10.0.0.1) |
| into your |
| (see below). You’ll also need to know the password set in the Password |
| Setting screen in order to access the router’s |
Port | The port number of remote management web interface. |
Enabled | Select “Enabled” to enable the remote management function. |
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
27