from the Internet. For example, some software sends network packets to the Internet in the background, even when you are not using the Internet. So please turn off your computer when you are not using it. This function also may not work with some ISP. So please make sure this function can work properly when you use this function in the first time, especially when your ISP charge you by time used.

1.4 Get to know XRT-412

Back Panel

The diagram (fig1.0) below shows XRT-412’s back panel. The router’s back panel is divided into three sections, LAN (1,2,3,4), WAN, USB and Reset:

Figure 1.0

1) Local Area Network (LAN)

XRT-412’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc.

2) Wide Area Network (WAN)

The WAN port is the segment connected to your xDSL or Cable modem and is linked to the Internet.

3) USB

The USB ports are the place that the printers connect to, LAN user can access the printers after installing the utility.

4)Reset

The Reset button allows you to do one of two things.

1)If problems occur with your router, press the router’s reset button with a pencil tip (for less than 4 seconds) and the router will re-boot itself, keeping your original configurations.

2)If problems persist or you experience extreme problems or you forgot your password, press the reset button for longer than 4 seconds and the router will reset itself to the factory default settings (warning: your original configurations will be replaced with the factory default settings)

Front Panel

On XRT-412’s front panel there are LED lights that inform you of machine current status. Below is an explanation of each LED and its description.

2