PROBLEM
Callers cannot hear me.
Possible Cause | Solution |
Mute is selected | Press the Power/Mute Button once as described |
| on page 11. |
Headset microphone | Align the headset boom with your mouth |
boom is incorrectly |
|
positioned |
|
Speak volume is too low Increase the Speak Volume by adjusting the Speak Volume Controls on the base unit as described on page 10.
| If the volume is still too low, select another Tx Slide |
| Switch setting as described on page 10. |
Incorrect Configuration | Try other Configuration Dial settings on the |
Dialsetting for your | base unit. |
telephone |
|
PROBLEM
I can hear a dial tone in more than one configuration position
Possible Cause | Solution |
Telephone will work | Use the position that sounds best to you and the |
in more than one | person you call. |
Configuration Dial |
|
position |
|
|
|
PROBLEM
I tried all four positions on the Configuration Dial and cannot hear a dial tone in any position.
Possible Cause | Solution |
Voyager 510 Bluetooth® | Check that the telephone is connected to the base |
Headset System is not | unit’s Telephone Cable Port. |
connected correctly |
|
| Check that the handset is connected to the base |
| unit’s Handset Cable Port. |
You may have an | Call your supplier or local Plantronics office |
incompatible phone | for help. |
The telephone line | Reconnect the handset to the telephone and test. |
| |
19 | |||
is dead |
|
