S T E P
5Pair your Voyager 510S Headset with your Bluetooth mobile phone
Pairing your Voyager headset to your Bluetooth mobile phone
1.Turn on our mobile phone and your headset. (See Step 1 on page 8 to power the headset on.)
2.On you headset, press and hold both the Listen volume adjust (+) button and the Call Control Button simultaneously until the red and blue indicator lights flash alternately. Then release.
Note: The headset will stay in pairing mode for 2 minutes.
3.Find Bluetooth on your mobile phone menu.
4.Search for devices.
5.Once your phone finds it, select “PLT 510”.
6.When prompted for a passkey, enter 0000 (4 zeros). The head- set indicator light will flash blue when paired successfully.
Press and hold both simultaneously.
For detailed pairing instructions for popular mobile phones visit:
www.plantronics.com/easytopair
Using your Voyager 510S Headset with your Bluetooth mobile phone
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit: www.plantronics.com/healthandsafety
To Place, Answer, or End Calls on your Bluetooth Mobile Phone
To Place a Call | 1. Enter Number – call is automatically transferred to the headset |
To Answer a Call | 1. Press Call Control Button |
To End a Call | 1. Press Call Control Button |
To Answer | 1. Press the Call Control Button to disconnect the current call |
a Second Incoming Call | 2. Press the Call Control Button again to accept the incoming call |
|
Questions? For fast, efficient Technical Support call:
