10 | HANDSET LIFTER (OPTIONAL) |
MAKING AND RECEIVING CALLS
WITH LIFTER INSTALLED
or | 1. | To make a call, press call control button on |
|
| headset or base to raise lifter. Use |
|
| telephone keypad to dial the number. |
|
| When call is complete, press call control |
|
| button to lower lifter (phone will hang up). |
| 2. | To receive a call, when telephone rings, |
|
| press call control button on headset or base |
|
| to raise lifter and receive call. When call is |
|
| complete, press call control button to lower |
|
| lifter (phone will hang up). |
SWITCHING FROM HANDSET TO HEADSET WHEN USING LIFTER
If you are using the telephone handset during a call and want to switch to your headset, press the call control button on either the headset or base unit.
The lifter will raise and you will be able to continue the call using your headset.
Replace the telephone handset on the lifter. When the call is finished press the call control button on headset or base. The lifter will lower the handset and end the call.
NORTEL PHONES ONLY:
1. Slide lifter sleeve (A) onto top of lifter arm.
2. Connect auxiliary microphone (B)
to lifter’s auxiliary microphone jack (refer to lifter diagram on page 9); stick microphone over telephone speaker.
Auxiliary Parts for Nortel Phones
(Part #
Lifter arm sleeve | Auxiliary |
| microphone |
