Plantronics 510S manual Handset Lifter Optional, Operation with the Handset Lifter Accessory

HANDSET LIFTER (OPTIONAL) 9

OPERATION WITH THE HANDSET LIFTER ACCESSORY

The Plantronics Handset Lifter is an accessory that has two functions:

•To automatically notify you when an incoming call is detected even when you are away from your desk.

•To lift or replace the telephone handset from its cradle even when you are away from your desk.

SETTING UP THE HANDSET LIFTER

1.Plug lifter power cord into handset lifter jack on base.

2.Set handset lifter on/off switch on base to “on” (down) position.

When set to “on,” the base senses when the headset has been removed or replaced in the base, automatically activating lifter to answer or end a call.

3.Position lifter under telephone receiver.

Tip: Remove only a tiny piece of mounting tape backing to temporarily stick lifter into position—you may need to move it!

4.Press call control button to activate lifter. Dial tone should sound if receiver is raised high enough. If necessary, adjust lifter height switch or re-position lifter under receiver.

5.Use mounting tape to fix lifter in position.

OFF

ON