| VOYAGER™ 510S SYSTEM DIAGRAMS & | 3 | |
| CONNECTING YOUR BASE |
| |
| Back | Outside |
|
Power/mute | Listen volume | Horizontal |
|
button |
| ||
adjust +/– | boom adjust |
| |
|
| ||
| buttons |
|
|
Eartip | Status indicator light |
| |
| (red/blue) |
| |
| Microphone | Call control button |
|
|
|
| |
|
| Charge connection |
|
| AC adapter |
|
|
CONNECTING YOUR VOYAGER 510S BASE
1.Connect telephone receiver cord to receiver
jack in the Voyager 510S Bluetooth® Headset System base (referred to as “base“ from this point on).
Note: The access to the receiver jack is fairly small.
2. Connect AC adapter to adapter jack in base; plug adapter into wall socket. Red power indicator on base will go on.
3. Connect telephone cord at rear of base to telephone receiver jack in telephone’s base.
