24
3) When the Phonebook location to be edited appears, press
SELECT/CH. “Store/Edit Name” appears.
4)Follow the steps 3 to 7 under “Storing Phone Numbers, Names, Distinctive Rings and Speed Dial” starting on page 17 to complete the editing operation.
5)Press SELECT/CH. You will hear a confirmation tone and “Done!” appears on the display.
DELETING THE STORED DATA
1) Select the Phonebook location to be deleted.
Press DELETE.
“Delete Memory?” appears.
2) Press ▲ to move the pointer to “Yes”.
3)Press SELECT/CH
or delete. You hear
aconfirmation tone. “Deleted!” appears in the display.
CHAIN DIALING
The memory locations in the remote are not limited to phone numbers. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Store the special number in the Phonebook location (refer to “Storing Phone Numbers, Names, Distinctive Rings and Speed Dial” on page 17).
Once you have called your bank, and when you are prompted to enter the account number, press 
/tSPEED and use ▲ or ▼ to select the number in the Phonebook location, then press SELECT/CH.
PHONEBOOK
25
