TIP

You can charge the remote with or without the beltclip.

38

INSTALLING THE BELTCLIP

TO ATTACH THE BELTCLIP

Insert the beltclip into the holes on each side of the remote. Press down.

TO REMOVE

THE BELTCLIP

Pull one side of the beltclip to release the tab from the hole.

NOTE ON POWER SOURCES

OUT OF RANGE WARNING

If you walk away from the base unit you will eventually exceed the maximum operating range for the CT12 cordless headset system. Any active call will be suspended and a double beep will sound in your headset every 10 seconds to warn you that you are out of range. The double beep will cease once you return within range and any active call will be taken off mute allowing you to resume your conversation.

LOW BATTERY WARNING

When the headset is running low (approx. 5 minutes talk time remaining), an audible warning will be heard through the headset as a single beep repeating every 10 seconds. Soon after hearing this warning, you should recharge the remote pack.

TIP

It is strongly advised that you avoid walking out of range when on an active call as you may find the call takes some time to re- establish after returning into range.

MORE

39

Page 20
Image 20
Plantronics 66523-01 manual Installing the Beltclip, OUT of Range Warning, LOW Battery Warning