More features
Save power If you leave your headset powered on but out of range of your paired phone for more than 90 minutes, your headset will conserve its battery power by entering into a DeepSleep™ mode.
Once back in range with your phone, tap the Call button 
to exit DeepSleep mode. If your phone is also ringing, tap the Call button 
again to answer your call.
Decipher the lights Your headset has an indicator light 
that flashes in response to a change in status or after a button press.
Some examples of what you will see are:
•Solid red until charging complete and then off
•Flashing red and white during pairing
•Triple red flash when less than 10 minutes of talk time
•Triple white flash at incoming call
Hear it whisper Your headset tells you about status changes in English. For example:
•“Power on”
•“Pairing successful”
•“Talk time (x) hours”
•“Mute on”
•“Lost connection”
•“Recharge headset”
Disable voice commands This headset only speaks and understands English. If you prefer to use the Call button 
to answer or reject calls, you can disable the voice commands “Answer” or “Ignore.”
With the headset powered on, simultaneously press the Call 
and Volume 
buttons until you see the indicator light flash white two times. Repeat these steps to reactivate
the commands.
Checking battery level Simply check the Headset battery meter on your iPhone (automatically displayed) or Android smartphone (enabled by the MyHeadset™or Find Myheadset™ apps)
9
