IBM Remote Supervisor Adapter II manual Slp command, Srcfg command

Option	Description	Values
-climode	CLI mode	none, cliems, cliuser
		v none: The command-line interface is disabled
		v cliems: The command-line interface is enabled
		with EMS-compatible keystroke sequences
		v cliuser: The command-line interface is enabled
		with user-defined keystroke sequences
-cliauth	CLI authentication	enabled, disabled

Example

x345RSA> portcfg com1 -serred enabled

-b 57600 -p none -s 1

-climode cliems -cliauth enabled

x345RSA> portcfg com1 -climode cliuser ok

x345RSA>

slp command

Syntax

slp [options] options:

-t -i

Description

Use the slp command to display and configure the Service Location Protocol (SLP) parameters.

Option	Description
-t	SLP address type (multicast/broadcast)
-i	SLP multicast address (must be between 224.0.0.0 and 239.255.255.255)

Example

x345/RSA> slp -t multicast

OK

x345/RSA> slp -t multicast

-i 239.255.255.253 x345/RSA>

srcfg command

Note: The srcfg command is not available for the Remote Supervisor Adapter II SlimLine.

Syntax

srcfg [options] options:

-passthrupassthru_mode

-entercliseqentercli_keyseq -exitcliseqexitcli_keyseq

104 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide