Power on server at specified time
To turn on the server at a specified time and start the operating system, click Power on Server at Specified Time and set the time to turn on the server.
Power off server immediately
To turn off the server without shutting down the operating system, click
Power Off Server Immediately.
Shut down OS and then power off server
To shut down the operating system and then turn off the server, click Shutdown OS and then Power Off Server. This option requires that the Remote Supervisor Adapter II software be installed. You might also have to install IBM Director Agent.
Shut down OS and then restart server
To restart the operating system, click Shut down OS and then Restart Server. This option requires that the Remote Supervisor Adapter II software be installed. You might also have to install IBM Director Agent.
Restart the server immediately
To turn off and then turn on the server immediately without first shutting down the operating system, click Restart the Server Immediately.
Schedule Daily/Weekly Power and Restart Actions
To shut down the operating system, turn off the server at a specified daily or weekly time (with or without restarting the server), and turn on the server at a specified daily or weekly time, click Schedule Daily/Weekly Power and Restart Actions.
A confirmation message is displayed if you select any of these options, and you can cancel the operation if it was selected accidentally.
Remote control
When you use the remote control function, you can view and interact with the server console, and you can assign to the server a
You must log in to the Remote Supervisor Adapter II with a user ID that has read/write access to use any of the remote control features.
Important information about updating your Remote Supervisor Adapter II firmware
Important: If you have updated the Remote Supervisor Adapter II firmware to the latest level or plan to in the future, read the following information.
The Remote Supervisor Adapter II uses a Java applet to perform many functions. When the Remote Supervisor Adapter II is updated to the latest firmware level, the Java applet is also updated to the latest level. By default, Java caches (stores locally) applets that were previously used. After a flash update of the Remote Supervisor Adapter II firmware, the Java applet that the server uses might not be at the latest level.
To correct this problem, complete the following steps:
1.Click Start → Settings → Control Panel.
2.
Chapter 5. Performing Remote Supervisor Adapter II tasks 81
