IBM Remote Supervisor Adapter II syshealth command, temps command, volts command, Description

8 I SERVPROC 12/18/03 10:09:25 Ethernet[0] Link Established at 100Mb, Full Duplex. 9 I SERVPROC 12/18/03 10:09:24 Ethernet[0] configured to do Auto Speed/Auto Duplex. 10 I SERVPROC 12/18/03 10:09:24 Ethernet[0] MAC Address currently

being used: 0x00-09-6B-CA-0C-80 x345RSA>

syshealth command

Description

Use the syshealth command to get a summary of the health of the server. The power state, system state, restart count, and Remote Supervisor Adapter II software status are displayed.

Example

x345RSA> syshealth Power On

State System power off/State unknown

DDnot active Restarts 0 x345RSA>

temps command

Description

Use the temps command to display all the temperatures and temperature thresholds. The same set of temperatures are displayed as in the Web interface.

Example

x345RSA> temps

Temperatures are displayed in degrees Fahrenheit/Celsius

WR W T SS HS

----------------------------------------

CPU1	65/18 72/22 80/27 85/29 90/32
CPU2	58/14 72/22 80/27 85/29 9/320
DASD1	66/19	73/23	82/28	88/31	9/332
Amb	59/15	70/21	83/28	90/32	9/355

x345RSA>

Notes:

1.The output has the following column headings: WR: warning reset

W: warning

T:temperature (current value)

SS:soft shutdown HS: hard shutdown

2.All temperature values are in degrees Fahrenheit/Celsius

volts command

Description

Use the volts command to display all the voltages and voltage thresholds. The same set of voltages are displayed as in the Web interface.

Example

x345RSA> volts
HSL	SSL	WL	WRL	V	WRH	WH	SSH	HSH

----------------------------------------------------------

5v 5.02 4.00 4.15 4.50 4.60 5.25 5.50 5.75 6.00

Chapter 6. Command-line interface 95