IBM Remote Supervisor Adapter II Direct LAN Connection, no LAN support, function not supported

the table, click the login link that corresponds to the remote system that you want to access. Then, follow the standard login procedure to gain access to that system.

Direct LAN Connection

Click the IP address link to bypass the ASM interconnect connection and to connect to a remote system directly through your Ethernet network. This connection offers faster access to a remote ASM.

To directly log in to a remote system that is displayed in the table, click the IP address link that corresponds to the remote system that you want to access. Then, follow the standard login procedure to gain access to that remote system.

Note: In certain cases, no IP address link for a direct LAN connection will be available, for one of the following reasons:

no LAN support

The service processor of the remote system does not have access to a LAN port.

function not supported

The service processor of the remote system does not have the ability to report its IP address through the ASM interconnect network.

no LAN connection

The service processor of the remote system has one of the following conditions:

vIt has not been manually configured with an IP address.

vIt failed to receive a dynamic IP address assignment from a DHCP server.

vIt has a faulty physical LAN connection.

4.Click the login link that corresponds to the processor or adapter that you want to access under the ASM Interconnect Connection column heading.

Note: It might take up to 45 seconds for newly attached servers to be reflected in the table of available remote servers, and up to 2 minutes for servers to be removed from the table when they are detached from the ASM interconnect network.

The Enter Network Password window opens.

5.Type your user name and password and click OK. The System Health Summary page is displayed. The adapter or processor name appears in orange above the navigation pane.

Note: Depending on the service processor that is on the remote server, some options might not be available.

6.Click Log Off Remote ASM to log off from the remote server.

90 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide