IBM Remote Supervisor Adapter II manual Configuring remote alert recipients

2.You cannot distinguish between the alerts that are sent to remote alert recipients. All configured recipients receive each alert that you select.

Configuring remote alert recipients

Notes:

1.For the Remote Supervisor Adapter II SlimLine, the configuring remote alert recipients feature is available only when using LAN-based alert functionality.

2.For the Remote Supervisor Adapter II SlimLine, the PPP settings are not available.

You can define up to 12 unique remote alert recipients. Each link for an alert recipient is labeled with the recipient name, notification method, and alert status.

To configure a remote alert recipient, complete the following steps:

1.Log in to the Remote Supervisor Adapter II for which you want to configure remote alert settings. For more information, see Chapter 2, “Opening and using the Web interface,” on page 5.

2.In the navigation pane, click Alerts. The Remote Alert Recipients page is displayed. You can see the notification method and alert status for each recipient, if they are set.

3.Click one of the remote alert recipient links. An individual recipient window similar to the one in the following illustration opens.

Chapter 3. Configuring the Remote Supervisor Adapter II 23