6: Line and Tunnel Settings
To Configure Tunnel Disconnect Mode Settings
Using Web Manager
To configure the Disconnect Mode for a specific tunnel, click Tunnel in the menu and select Tunnel 1
Using the CLI
To enter the Tunnel 1 Disconnect command level: enable
Using XML
Include in your file: <configgroup name=”tunnel disconnect” instance=”1”>
Modem Emulation
Some older equipment is designed to attach to a serial port and dial into a network with a modem. This equipment uses AT commands to control the connection. For compatibility with these older devices on modern networks, our product mimics the behavior of the modem.
| Table |
|
|
Tunnel Modem | Description |
Emulation Settings |
|
Echo Pluses | Set whether the pluses will be echoed back during a “pause +++ pause” escape |
| sequence on the Serial Line. Choices are: |
| Enabled |
| Disabled (default) |
|
|
Echo Commands | Set whether characters read on the Serial Line will be echoed, while the Line is in |
| Modem Command Mode. Choices are: |
| Enabled |
| Disabled |
|
|
Verbose Response | Set whether Modem Response Codes are sent out on the Serial Line. Choices are: |
| Enabled |
| Disabled |
|
|
Response Type | Select a representation for the Modem Response Codes sent out on the Serial |
| Line. Choices are: |
| Text (ATV1) (default) |
| Numeric (ATV0) |
|
|
Error Unknown | Set whether the Error Unknown Commands is enabled (ATU0) and ERROR is |
Commands | returned on the Serial Line for unrecognized AT commands. OTherwise (ATU1) |
| OK is returned for unrecognized AT commands. Choices are: |
| Enabled |
| Disabled (default) |
|
|
Incoming Connection | Set how and if requests are answered after an incoming RING (ATS0=2). Choices |
| are: |
| Disabled (default) |
| Automatic |
| Manual |
|
|
XPort® Pro Lx6 Embedded Device Server User Guide | 36 |
