10: Maintenance and Diagnostics Settings
ICMP and ICMPv6 Settings
| Table | |
|
|
|
Protocol Stack |
| Description |
ICMP Settings |
|
|
|
|
|
State |
| The State selection is used to turn on/off processing of ICMP messages. |
|
| This includes both incoming and outgoing messages. Choose Enabled or |
|
| Disabled. |
|
|
|
To Configure ICMP Network Stack Settings
Using Web Manager
To configure ICMP protocol settings, click Protocol Stack in the menu and select ICMP.
Using the CLI
To enter the command level: enable
Using XML
Include in your file: <configgroup name=”icmp”>
To View ICMPv6 Network Stack Settings
Using Web Manager
To view ICMPv6 protocol settings, click Protocol Stack in the menu and select ICMPv6.
Using the CLI
Not applicable.
Using XML
Not applicable.
ARP Settings
| Table |
|
|
Protocol Stack | Description |
ARP Settings |
|
|
|
IP Address | Enter the IPv4 address to add to the ARP cache. |
|
|
MAC Address | Enter the MAC address to add to the ARP cache. |
|
|
Remove | Click the Remove link beside a specific address to remove it. |
|
|
Remove All | Click the Remove All link underneath all listed addresses to remove all the addresses. |
|
|
XPort® Pro Lx6 Embedded Device Server User Guide | 51 |
