|
| 6: Line and Tunnel Settings |
|
|
|
| Tunnel Packing Mode | Description |
| Settings (continued) |
|
| Timeout | Set the timeout value, in milliseconds, after the first character is received on |
|
| the serial line, before data is sent on the network. Valid range is 1 to 30000 |
|
| milliseconds. Default is 1000. |
|
|
|
| Send Character | Enter Control Characters in any of the following forms: |
|
| <control>J |
|
| 0xA (hexadecimal) |
|
| \10 (decimal) |
|
| If used, the Send Character is a single printable character or a control |
|
| character that, when read on the Serial Line, forces the queued data to be |
|
| sent on the network immediately. |
|
|
|
| Trailing Character | Enter Control Characters in any of the following forms: |
|
| <control>J |
|
| 0xA (hexadecimal) |
|
| \10 (decimal). |
|
| If used, the Trailing Character is a single printable character or a control |
|
| character that is injected into the outgoing data stream right after the Send |
|
| Character. Disable the Trailing Character by blanking the field (setting it to |
|
| <None>). |
|
|
|
To Configure Tunnel Packing Mode Settings
Using Web Manager
To configure the Packing Mode for a specific tunnel, click Tunnel in the menu and select Tunnel 1
Using the CLI
To enter the Tunnel 1 Packing command level: enable
Using XML
Include in your file: <configgroup name="tunnel packing" instance="1">
Accept Mode
In Accept Mode, the XPort Pro Lx6 listens (waits) for incoming connections from the network. A remote node on the network initiates the connection.
The configurable local port is the port the remote device connects to for this connection. There is no remote port or address. Supported serial lines and associated local port numbers progress sequentially in matching value. For instance, the default local port is 10001 for serial line 1.
Serial data can still be received while waiting for a network connection, keeping in mind serial data buffer limitations.
XPort® Pro Lx6 Embedded Device Server User Guide | 31 |
