8: Configurable Pin Manager

 

 

 

 

CPM – CPs Status

Description

 

Binary

Shows the binary assertion value of the corresponding bit.

 

 

 

 

CP#

Shows the CP number.

 

 

 

 

Groups

Lists the groups in which the CP is a member.

 

 

 

Notes:

To modify a CP, all groups in which it is a member must be disabled.

The changes to a CP configuration are not saved in FLASH. Instead, these CP settings are used when the CP is added to a CP Group. When the CP Group is saved, its CP settings are saved with it. Thus, a particular CP may be defined as "Input" in one group but as "Output" in another. Only one group containing any particular CP may be enabled at once.

CPM: Groups

The CP Groups settings allow for the management of CP groups. Groups can be created or deleted. CPs can be added to or removed from groups. A group, based on its state, can trigger outside events (such as sending email messages). Only an enabled group can be a trigger.

Table 8-3 CPM Group Current Configuration

CPM – Groups Current

Description

Configuration

 

Group Name

Shows the CP group’s name.

 

 

State

Indicates whether the group is enabled or disabled.

 

 

CP Info

Shows the number of CPs assigned to the group.

 

 

 

Table 8-4 CPM Group Status

 

 

CPM – Groups Group

Description

Status

 

Name

Shows the CP Group name.

 

 

State

Current enable state of the CP group.

 

 

Value

Shows the CP group’s current value or shows “Disabled” if the group is

 

disabled.

 

 

Bit

Visual display of the bit placeholders for a CP.

 

 

Level

A “+” symbol indicates the CP’s bit position is asserted (the voltage is high).

 

A “-“ indicates the CP voltage is low.

 

 

I/O

Indicates the current status of the pin:

 

I = input

 

O = output

 

<blank> = unassigned

 

 

Logic

An “I” indicates the CP output is inverted.

 

 

Binary

Shows the assertion value of the corresponding bit.

 

X = group is disabled or bit is unassigned in group

 

 

CP#

Shows the configurable pin number and its bit position in the CP group.

 

 

XPort® Pro Lx6 Embedded Device Server User Guide

41

Page 41
Image 41
Lantronix LX6 manual CPM Groups, Configurable Pin Manager, CPM Group Current Configuration, CPM Group Status