Lantronix LX6 manual Tunnel Settings, To View Line Statistics, Serial Settings

6: Line and Tunnel Settings

To configure a specific line in Command Mode, click Line in the menu and select Line 1 -> Command Mode (Table 6-2).

Using the CLI

To enter Line 1 command level: enable -> line 1

Using XML

Include in your file: <configgroup name="line" instance="1">

Include in your file: <configgroup name="serial command mode" instance="1">

To View Line Statistics

Using Web Manager

To view statistics for Line 1, click Line in the menu and select Line 1 -> Statistics.

Using the CLI

To view Line statistics: enable -> line 1, show statistics

Using XML

Include in your file: <statusgroup name=”line” instance=”1”>

Tunnel Settings

Tunneling allows serial devices to communicate over a network, without “being aware” of the devices which establish the network connection between them. Tunneling parameters are configured using the Tunnel menu and submenus. The Tunnel settings allow you to configure how the Serial-Network tunneling operates. Tunneling is available on all serial lines. The connections on one serial line are separate from those on another serial port.

Notes: The following section describes the steps to view and configure Tunnel 1 settings; these steps apply to other tunnel instances of the device.

Tunnel Settings

Serial Settings

These serial settings for the tunnel apply to the Serial Line interface. The Line Settings and Protocol are displayed for informational purposes and must be configured from the Line settings.

XPort® Pro Lx6 Embedded Device Server User Guide 29