9: Services Settings

Syslog Settings

Description

(continued)

 

Severity Log Level

Specify the minimum level of system message the XPort Pro Lx6 should log. This

 

setting applies to all syslog facilities. The drop-down list in the Web Manager is in

 

descending order of severity (e.g., Emergency is more severe than Alert.)

 

 

To View or Configure Syslog Settings

Using Web Manager

To configure the Syslog, click Syslog in the menu.

Using the CLI

To enter the Syslog command level: enable -> config -> syslog

Using XML

Include in your file: <configgroup name=”syslog”>

HTTP Settings

Hypertext Transfer Protocol (HTTP) is the transport protocol for communicating hypertext documents on the Internet. HTTP defines how messages are formatted and transmitted. It also defines the actions web servers and browsers should take in response to different commands. HTTP Authentication enables the requirement of usernames and passwords for access to the device.

 

Table 9-4HTTP Settings

 

 

HTTP Settings

Description

State

Select to enable or disable the HTTP server:

 

Enabled (default)

 

Disabled

 

 

Port

Enter the port for the HTTP server to use. The default is 80.

 

 

Max Timeout

Enter the maximum time for the HTTP server to wait when receiving a

 

request. This prevents Denial-of-Service (DoS) attacks. The default is 10

 

seconds.

 

 

Max Bytes

Enter the maximum number of bytes the HTTP server accepts when receiving

 

a request. The default is 65536 KB which prevents DoS attacks. The range

 

varies from 2048 to 65536.

 

Note: You may need to increase this number in some cases where the

 

browser is sending data aggressively within TCP windows size limit, when file

 

(including firmware upgrade) is uploaded from webpage.

 

 

Logging State

Select to enable or disable HTTP server logging:

 

Enabled (default)

 

Disabled

 

 

Max Log Entries

Set the maximum number of HTTP server log entries. Only the last Max Log

 

Entries are cached and viewable.

 

 

XPort® Pro Lx6 Embedded Device Server User Guide

45

Page 45
Image 45
Lantronix LX6 manual Http Settings, To View or Configure Syslog Settings, Severity Log Level