Patton electronic 1068 user manual Configuration, Configuring the Hardware DIP Switches

4.0 CONFIGURATION

The Model 1068 VLINK modem has eight DIP switches for configuring the unit for a wide variety of applications. This section describes switch locations and explains the different configurations. No dip switch options are available on the 1058.

4.1 CONFIGURING THE HARDWARE DIP SWITCHES

Using a small flat-tip screwdriver, remove the protective cover located on the underside of the VLINK modem (see Figure 8).

Figure 8. Removing protective cover

Figure 9 and Figure 10 on page 14 show the orientation of the DIP switches in the On and Off positions.

13