Patton electronic 1068 Led, Description, LED is solid yellow and the Vlink Link LED is Off

Table 5: Front panel LED description for standalone modem
LED	Description
Power	On (green) when power is applied to the unit. Off
	when no power is applied to the unit.
VLINK - Link	On (green) when the end-to-end VDSL link between
	the units is established. Off when the link has not
	been established or when the link fails
VLINK - QOL	Flashes yellow at different rates to indicate the
	amount of error correction taking place on data pass-
	ing over the VDSL link. This is a normal operating
	condition and all data is passing correctly over the
	link even if the link is solidly yellow. However, if the
	LED is solid yellow and the VLINK Link LED is Off,
	Off when no power is applied to the unit.
Ethernet - Link	On (green) when the 10/100Base-T Ethernet link
	has been established. Off when the 10/100Base-T
	Ethernet link has not been established or when the
	link fails. Flashes when there is Ethernet activity.
Ethernet - COL	Flashes yellow to indicate Ethernet collisions are
(Collision)	occurring.
Ethernet - FDx	On (yellow) when in full-duplex Ethernet mode. Off
(Duplex)	when when operating in half-duplex Ethernet mode.
Ethernet - 100M	On (yellow) when the link has not been established
	or when operating in 100-Mbps Ethernet mode. Off
	when operating in 10-Mbps Ethernet mode.

18