Manuals / Patton electronic / Computer Equipment / Network Card

Patton electronic user manual User Manual, VLINK MODEM Model 1068 and

Models: 1068

1 27

Download 27 pages 17.28 Kb

Page 1

Image 1

USER

MANUAL

VLINK MODEM

Model 1068 and 1058

	Part# 07M1068-UM	SALES OFFICE
	Doc# 05816U2-001	(301) 975-1000
	Rev. A	TECHNICAL SUPPORT
	Revised 10/17/06	TECHNICAL SUPPORT
	Revised 10/17/06	(301) 975-1007
		(301) 975-1007

An ISO-9001Certiﬁed

Company

Page 1

Image 1

Patton electronic user manual User Manual, VLINK MODEM Model 1068 and, An ISO-9001Certiﬁed Company

Contents

VLINK MODEM Model 1068 and USER MANUALAn ISO-9001Certiﬁed Company Warranty Information CONTENTSInstallation ConfigurationTerminal Block 1068DV/TB45 Only Distance Chart, Based on 24 AWG 0.5 MMC.3 POTS/ISDN Interface RJ-451.1 RADIO AND TV INTERFERENCE FCC PART 1.0 WARRANTY INFORMATION1.2 CE DECLARATION OF CONFORMITY accessible, and protected by a circuit breaker 1.3 SERVICETel +1 301 Email support@patton.com 10 feet 3 meters of the device, shall be easily2.0 GENERAL INFORMATION 2.1 FEATURESAvailable in rack-mount or standalone conﬁgurations Made in the USA 2.2 DESCRIPTIONFigure 1 shows a typical point-to-point application 3.1 STANDALONE UNIT INSTALLATION 3.0 INSTALLATIONVLINK Data & Voice 1068 1068RC 3.2 RACK CARD INSTALLATION3.3 CONNECTING THE TWISTED-PAIR LINE INTERFACE 1 TX+/RX+ data output from VLINK modem 3.4 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE2 TX-/RX- data output from VLINK modem 3 RX+/TX+ data input to VLINK modem 4 no connection 5 no connection3.6 CONNECTING POWER 3.5 CONNECTING THE POTS/ISDN LINEFigure 7. VLINK RJ-45 POTS/ISDN interface 4.1 CONFIGURING THE HARDWARE DIP SWITCHES 4.0 CONFIGURATIONFigure 8. Removing protective cover Figure 9. Model 1068 standalone modem DIP switch orientation Switch toggleFigure 10. Model 1068 rack card DIP switch orientation PowerSwitch S1-1 Ethernet Auto Sense 4.2 CONFIGURING DIP SWITCH S1Setting Switches S1-2 and S1-4 Data RateAsymmetric Line Rates DS/US DS = downstream, US = upstreamS1-5 S1-65.0 OPERATION 5.1 POWER UP5.2 FRONT PANEL LED STATUS MONITORS PowerLED is solid yellow and the VLINK Link LED is Off Descriptioning the transmission of corrupted data to the Ethernet Descriptionmeans that the VDSL line is noisy-although the data VLINK Link QOLA.7 POWER SUPPLY A.6 LED STATUS INDICATORSAPPENDIX A A.1 LAN CONNECTIONA.10 DIMENSIONS A.8 TEMPERATURE RANGEA.9 HUMIDITY External AC and DC options AC 120 VAC, 220 VAC, and UI 120-240 VACAPPENDIX B Power SuppliesPatton Model # Base ModelsPatton Model # Power CordsDescription C.1 10/100BASE-T INTERFACE RJ-45 APPENDIX CC.2 VDSL INTERFACE RJ-45 Terminal Block 1068DV/TB45 OnlyAPPENDIX D This is the only option available for ModelSymm Line Rate Distance in feet kmPage Copyright Patton Electronics Company All Rights Reserved