Patton electronic 1068 user manual General Information, Features

The Interconnecting cables shall be acceptable for external use and shall be rated for the proper applica- tion with respect to voltage, current, anticipated tem- perature, flammability, and mechanical serviceability

WARNING

In accordance with the requirements of council direc- tive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you sepa- rate this product from other waste and scrap and deliver to the WEEE collection system in your country for recy- cling.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for one year for parts and labor. If any questions or problems arise during installation or use of this product, contact Patton Electronics Technical Support at +1 (301) 975-1007.

2.1 FEATURES

•Easy to install standalone VLINK modems (no configuration required)

•Auto-MDIX Ethernet

•Auto-sensing full or half-duplex Ethernet

•Auto-sensing 10/100Base-TX

•Extends network connections up to 6,000 ft (1.83 km) over 2-wire 24- AWG unconditioned lines

•Switch selectable line rates up to 16.67 Mbps

•7 symmetric or asymmetric settings via DIP switch

•POTS/ISDN splitter on board

•Transparent operation

•LED indicators for Power, Ethernet Link & Activity, VLINK link & Quality of Line (QOL)

•Surge suppression up to 20 kA (8/20 ∝s)

6