Manuals / Patton electronic / Computer Equipment / Network Card

Patton electronic 1068 Switch toggle, for ON position, Push toggle, to right for, OFF position

Models: 1068

1 27

Page 14

Figure 9. Model 1068 standalone modem DIP switch orientation

VLINK	Modem
	Modem
	Power
VLINK
	Link
	QOL
Ethernet
	Link
	Activity

S1	4
ON	123
ON

Switch toggle	ON			3	4
			2	3
		1	2
		1

		S1
Push toggle to left
for ON position			4
for ON position			3
Push toggle			3
Push toggle	ON		12
to right for	ON		12
to right for
OFF position
OFF position

Figure 10. Model 1068 rack card DIP switch orientation

Page 14

Image 14

Patton electronic 1068 Switch toggle, for ON position, to right for, OFF position, Push toggle to left, Link, Vlink

Contents

An ISO-9001Certiﬁed Company USER MANUALVLINK MODEM Model 1068 and Installation CONTENTSWarranty Information ConfigurationC.3 POTS/ISDN Interface Distance Chart, Based on 24 AWG 0.5 MMTerminal Block 1068DV/TB45 Only RJ-451.2 CE DECLARATION OF CONFORMITY 1.0 WARRANTY INFORMATION1.1 RADIO AND TV INTERFERENCE FCC PART Tel +1 301 Email support@patton.com 1.3 SERVICEaccessible, and protected by a circuit breaker 10 feet 3 meters of the device, shall be easily2.1 FEATURES 2.0 GENERAL INFORMATIONFigure 1 shows a typical point-to-point application 2.2 DESCRIPTIONAvailable in rack-mount or standalone conﬁgurations Made in the USA VLINK Data & Voice 1068 3.0 INSTALLATION3.1 STANDALONE UNIT INSTALLATION 3.2 RACK CARD INSTALLATION 1068RC3.3 CONNECTING THE TWISTED-PAIR LINE INTERFACE 2 TX-/RX- data output from VLINK modem 3.4 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE1 TX+/RX+ data output from VLINK modem 3 RX+/TX+ data input to VLINK modem 4 no connection 5 no connectionFigure 7. VLINK RJ-45 POTS/ISDN interface 3.5 CONNECTING THE POTS/ISDN LINE3.6 CONNECTING POWER Figure 8. Removing protective cover 4.0 CONFIGURATION4.1 CONFIGURING THE HARDWARE DIP SWITCHES Figure 10. Model 1068 rack card DIP switch orientation Switch toggleFigure 9. Model 1068 standalone modem DIP switch orientation PowerSetting 4.2 CONFIGURING DIP SWITCH S1Switch S1-1 Ethernet Auto Sense Switches S1-2 and S1-4 Data RateS1-5 DS = downstream, US = upstreamAsymmetric Line Rates DS/US S1-65.2 FRONT PANEL LED STATUS MONITORS 5.1 POWER UP5.0 OPERATION PowerDescription LED is solid yellow and the VLINK Link LED is Offmeans that the VDSL line is noisy-although the data Descriptioning the transmission of corrupted data to the Ethernet VLINK Link QOLAPPENDIX A A.6 LED STATUS INDICATORSA.7 POWER SUPPLY A.1 LAN CONNECTIONA.9 HUMIDITY A.8 TEMPERATURE RANGEA.10 DIMENSIONS External AC and DC options AC 120 VAC, 220 VAC, and UI 120-240 VACPatton Model # Power SuppliesAPPENDIX B Base ModelsDescription Power CordsPatton Model # C.2 VDSL INTERFACE RJ-45 APPENDIX CC.1 10/100BASE-T INTERFACE RJ-45 Terminal Block 1068DV/TB45 OnlySymm Line Rate This is the only option available for ModelAPPENDIX D Distance in feet kmPage Copyright Patton Electronics Company All Rights Reserved

Figure 9. Model 1068 standalone modem DIP switch orientation

VLINK

Modem

Power

Link

Switch toggle

Push toggle to left

for ON position

Push toggle

to right for

OFF position

Figure 10. Model 1068 rack card DIP switch orientation