Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3

WEP Configuration Options

The WEP settings must match on all 802.11 devices that are within the same wireless network as identified by the SSID. In general, if your mobile clients will roam between access points, then all of the 802.11 access points and all of the 802.11 client adapters on the network must have the same WEP settings.

Note: Whatever keys you enter for an AP, you must also enter the same keys for the client adapter in the same order. In other words, WEP key 1 on the AP must match WEP key 1 on the client adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter, and so on.

Note: The AP and the client adapters can have different default WEP Keys as long as the keys are in the same order. In other words, the AP can use WEP key 2 as its default key to transmit while a client adapter can use WEP key 3 as its default key to transmit. The two devices will communicate as long as the AP’s WEP key 2 is the same as the client’s WEP key 2 and the AP’s WEP key 3 is the same as the client’s WEP key 3.

Wireless Channels

The wireless frequencies used by 802.11b/g networks are discussed below.

IEEE 802.11b/g wireless nodes communicate with each other using radio frequency signals in the ISM (Industrial, Scientific, and Medical) band between 2.4 GHz and 2.5 GHz. Neighboring channels are 5 MHz apart. However, due to spread spectrum effect of the signals, a node sending signals using a particular channel will utilize frequency spectrum 12.5 MHz above and below the center channel frequency. As a result, two separate wireless networks using neighboring channels (for example, channel 1 and channel 2) in the same general vicinity will interfere with each other. Applying two channels that allow the maximum channel separation will decrease the amount of channel cross-talk, and provide a noticeable performance increase over networks with minimal channel separation.

The radio frequency channels used in 802.11b/g networks are listed in Table B-2:

Table B-2:

802.11b/g Radio Frequency Channels

 

 

 

 

Channel

Center Frequency

Frequency Spread

 

 

 

 

 

1

2412 MHz

2399.5 MHz - 2424.5 MHz

 

 

 

 

 

2

2417 MHz

2404.5 MHz - 2429.5 MHz

 

 

 

 

 

3

2422 MHz

2409.5 MHz - 2434.5 MHz

 

 

 

 

 

 

 

 

 

Wireless Networking Basics

 

B-7

202-10060-02, February 2005

Page 67
Image 67
NETGEAR WG602v3 manual Wireless Channels, WEP Configuration Options

WG602v3 specifications

The NETGEAR WG602v3 is a wireless access point designed primarily for home and small office environments. As part of the NETGEAR family of networking devices, the WG602v3 ensures reliable and secure wireless connectivity, making it an essential component for users who require a seamless internet experience.

One of the main features of the NETGEAR WG602v3 is its support for the IEEE 802.11g wireless standard, which allows for data transfer rates of up to 54 Mbps. This standard ensures compatibility with older 802.11b devices while providing enhanced performance for newer wireless devices. The WG602v3 operates in the 2.4 GHz frequency band, ensuring widespread coverage and the ability to penetrate walls and barriers, making it suitable for diverse environments.

Another significant characteristic of this access point is its user-friendly setup process. The WG602v3 includes an intuitive web-based user interface that allows users to configure settings with ease. This simplifies the installation process and enables users, even those with limited technical knowledge, to quickly establish a robust wireless network.

Security is paramount in today’s interconnected world, and NETGEAR has incorporated several security features into the WG602v3. The device supports Wi-Fi Protected Access (WPA and WPA2) encryption protocols, ensuring that users can secure their data and prevent unauthorized access. Additionally, the WG602v3 includes a MAC address filtering feature that further enhances network security by allowing only designated devices to connect to the network.

The WG602v3 is also equipped with a detachable antenna, allowing users to customize their wireless coverage based on their specific needs. This adaptability makes it easier to optimize the access point’s performance in different physical layouts. Furthermore, it supports Power over Ethernet (PoE), enabling installation in locations without an accessible power outlet, which is particularly useful in unconventional setups.

In summary, the NETGEAR WG602v3 wireless access point combines ease of use, robust security features, and flexibility in installation to provide reliable connectivity. Its compatibility with both 802.11g and b devices, combined with user-friendly configuration options, ensures that it meets the needs of various users, from casual home users to small office setups, making it a versatile solution for enhancing wireless networks.