Manuals / NETGEAR / Computer Equipment / Network Card

NETGEAR WG602v3 manual Default Factory Settings, Feature Factory Default Settings

Models: WG602v3

1 122
Download 122 pages 37.95 Kb
Page 20
Image 20

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3

For best results, place your wireless access point:

•Near the center of the area in which your PCs will operate.

•In an elevated location such as a high shelf where the wirelessly connected PCs have line-of-sight access (even if through walls).

•Away from sources of interference, such as PCs, microwaves, and 2.4 GHz cordless phones.

•Away from large metal surfaces.

•If using multiple access points, it is better if adjacent access points use different radio frequency Channels to reduce interference. The recommended Channel spacing between adjacent access points is 5 Channels (for example, use Channels 1 and 6, or 6 and 11).

The time it takes to establish a wireless connection can vary depending on both your security settings and placement.

Default Factory Settings

When you first receive your WG602v3, the default factory settings will be set as shown below. To restore these defaults, see “WG602v3 Wireless Access Point Rear Panel” on page 2-6.

FEATURE

FACTORY DEFAULT SETTINGS

 

 

User Name (case sensitive)

admin

 

 

Password (case sensitive)

password

 

 

Access Point Name

NETGEARxxxxxx where xxxxxx are the last six digits of

 

the wireless access point's MAC address

DHCP

DHCP client

 

 

IP Configuration

IP Address: 192.168.0.227

if DHCP server is unavailable

Subnet Mask: 255.255.255.0

 

Gateway: 0.0.0.0

Wireless Mode (Access Point or Bridge)

Access Point

 

 

Wireless Network Name (SSID)

NETGEAR

 

 

Broadcast Network Name

Enabled

 

 

802.11g/b

11

Radio Frequency Channel

 

 

 

WEP/WPA

Disabled

 

 

Authentication Type

Auto

 

 

3-2

Basic Installation and Configuration

202-10060-02, February 2005

Page 19 Page 21
Page 20
Image 20
NETGEAR WG602v3 manual Default Factory Settings, Feature Factory Default Settings
Page 19 Page 21

WG602v3 specifications

The NETGEAR WG602v3 is a wireless access point designed primarily for home and small office environments. As part of the NETGEAR family of networking devices, the WG602v3 ensures reliable and secure wireless connectivity, making it an essential component for users who require a seamless internet experience.

One of the main features of the NETGEAR WG602v3 is its support for the IEEE 802.11g wireless standard, which allows for data transfer rates of up to 54 Mbps. This standard ensures compatibility with older 802.11b devices while providing enhanced performance for newer wireless devices. The WG602v3 operates in the 2.4 GHz frequency band, ensuring widespread coverage and the ability to penetrate walls and barriers, making it suitable for diverse environments.

Another significant characteristic of this access point is its user-friendly setup process. The WG602v3 includes an intuitive web-based user interface that allows users to configure settings with ease. This simplifies the installation process and enables users, even those with limited technical knowledge, to quickly establish a robust wireless network.

Security is paramount in today’s interconnected world, and NETGEAR has incorporated several security features into the WG602v3. The device supports Wi-Fi Protected Access (WPA and WPA2) encryption protocols, ensuring that users can secure their data and prevent unauthorized access. Additionally, the WG602v3 includes a MAC address filtering feature that further enhances network security by allowing only designated devices to connect to the network.

The WG602v3 is also equipped with a detachable antenna, allowing users to customize their wireless coverage based on their specific needs. This adaptability makes it easier to optimize the access point’s performance in different physical layouts. Furthermore, it supports Power over Ethernet (PoE), enabling installation in locations without an accessible power outlet, which is particularly useful in unconventional setups.

In summary, the NETGEAR WG602v3 wireless access point combines ease of use, robust security features, and flexibility in installation to provide reliable connectivity. Its compatibility with both 802.11g and b devices, combined with user-friendly configuration options, ensures that it meets the needs of various users, from casual home users to small office setups, making it a versatile solution for enhancing wireless networks.