Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3

The purpose of 11d is to add features and restrictions to allow WLANs to operate within the rules of these countries. Equipment manufacturers do not want to produce a wide variety of country-specific products and users that travel do not want a bag full of country-specific WLAN PC cards. The outcome will be country-specific firmware solutions.

802.11e Standard

802.11e is a proposed IEEE standard to define quality of service (QoS) mechanisms for wireless gear that gives support to bandwidth-sensitive applications such as voice and video.

802.11g Standard

Similar to 802.11b, this physical layer standard provides a throughput of up to 54 Mbps. It also operates in the 2.4 GHz frequency band but uses a different radio technology in order to boost overall bandwidth.

802.11i

This is the name of the IEEE Task Group dedicated to standardizing WLAN security. The 802.11i Security has a frame work based on RSN (Robust Security Mechanism). RSN consists of two parts: 1) The Data Privacy Mechanism and 2) Security Association Management.

The Data Privacy Mechanism supports two proposed schemes: TKIP and AES. TKIP (Temporal Key Integrity) is a short-term solution that defines software patches to WEP to provide a minimally adequate level of data privacy. AES or AES-OCB (Advanced Encryption Standard and Offset Codebook) is a robust data privacy scheme and is a longer-term solution.

Security Association Management is addressed by a) RSN Negotiation Procedures, b) IEEE 802.1x Authentication and c) IEEE 802.1x Key management.

The standards are being defined to naturally co-exist with pre-RSN networks that are currently deployed.

802.11n Standard

A recently formed (Oct 2003) IEEE official task group referred to as: 802.11n or "TGn" for the 100 Mbps wireless physical layer standard protocol. Current published ratification date is December 2005. As of February 2004, no draft specification has been written - It is expected to use both the 2.4 and 5GHz frequencies.

AES (Advanced Encryption Standard)

A symmetric 128-bit block data encryption technique developed by Belgian cryptographers Joan Daemen and Vincent Rijmen. The U.S government adopted the algorithm as its encryption technique in October 2000, replacing the DES encryption it used. AES works at multiple network layers simultaneously. The National Institute of Standards and Technology (NIST) of the U.S. Department of Commerce selected the algorithm, called Rijndael (pronounced Rhine Dahl or Rain Doll), out of a group of five algorithms under consideration, including one called MARS from a large research team at IBM. AES is expected to replace WEP as a WLAN encryption method in 2003.

2

Glossary

202-10060-02, February 2005

Page 108
Image 108
NETGEAR WG602v3 manual 802.11e Standard

WG602v3 specifications

The NETGEAR WG602v3 is a wireless access point designed primarily for home and small office environments. As part of the NETGEAR family of networking devices, the WG602v3 ensures reliable and secure wireless connectivity, making it an essential component for users who require a seamless internet experience.

One of the main features of the NETGEAR WG602v3 is its support for the IEEE 802.11g wireless standard, which allows for data transfer rates of up to 54 Mbps. This standard ensures compatibility with older 802.11b devices while providing enhanced performance for newer wireless devices. The WG602v3 operates in the 2.4 GHz frequency band, ensuring widespread coverage and the ability to penetrate walls and barriers, making it suitable for diverse environments.

Another significant characteristic of this access point is its user-friendly setup process. The WG602v3 includes an intuitive web-based user interface that allows users to configure settings with ease. This simplifies the installation process and enables users, even those with limited technical knowledge, to quickly establish a robust wireless network.

Security is paramount in today’s interconnected world, and NETGEAR has incorporated several security features into the WG602v3. The device supports Wi-Fi Protected Access (WPA and WPA2) encryption protocols, ensuring that users can secure their data and prevent unauthorized access. Additionally, the WG602v3 includes a MAC address filtering feature that further enhances network security by allowing only designated devices to connect to the network.

The WG602v3 is also equipped with a detachable antenna, allowing users to customize their wireless coverage based on their specific needs. This adaptability makes it easier to optimize the access point’s performance in different physical layouts. Furthermore, it supports Power over Ethernet (PoE), enabling installation in locations without an accessible power outlet, which is particularly useful in unconventional setups.

In summary, the NETGEAR WG602v3 wireless access point combines ease of use, robust security features, and flexibility in installation to provide reliable connectivity. Its compatibility with both 802.11g and b devices, combined with user-friendly configuration options, ensures that it meets the needs of various users, from casual home users to small office setups, making it a versatile solution for enhancing wireless networks.