Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3
Introduction 2-5
202-10060-02, February 2005
To qualify for product updates and product warranty registrations, we encourage you to register on
the NETGEAR Web site at: http://www.netgear.com.
Hardware Description
The NETGEAR WG602v3 54 Mbps Wireless Access Point front and rear hardware functions are
described below.

WG602v3 Wireless Access Point Front Panel

The WG602v3 Access Point provides three status LEDs.
Figure 2-1: WG602v3 front panel
The following table explains the LED indicators:
LED DESCRIPTION
Power
Off
On
Power Indicator
No power. If this LED does not come on with the power adapter and cord correctly
installed, see Chapter 6, “Troubleshooting.”
Power is on.
Ethernet Ethernet LAN Link Activity Indicator
Off
Green On Indicates no Ethernet link detected.
100 Mbps Fast Ethernet link detected, no activity.
Green Blink Indicates data traffic on the 100Mbps Ethernet LAN.
Amber 0n 10 Mbps Ethernet link detected, no activity.
Amber Blink Indicates data traffic on the 10Mbps Ethernet LAN.
Power Ethernet Wireless