Omega Engineering #M3350/0101 CN8-SWUserÕs Guide, Viewing Process Values and Changing Setpoint

CN8-SW™UserÕs Guide

	4.2.1		Communication Parameters	4-2
	4.2.2		Network Addresses	4-3
	4.3	Configuring Communication Parameters for CN8-SW System		4-4
	4.4	Recognizing Controllers with the CN8-SW Software		4-6
	4.4.1		Introduction	4-6
	4.4.2 Automatically Using the Find Controllers Option			4-6
	4.4.3 Manually Using the Controller Menu			4-10
	4.5	Deleting a Controller		4-11
	4.6	Changing Baud Rate after Communication Has Been Established		4-12
	4.7	Naming Controllers		4-14
	4.8	Saving the .MCS File		4-14
	4.9	Closing an .MCS File		4-14
	4.10	Creating a New .MCS File		4-14
	4.11	Opening an Existing .MCS File		4-15
5.	Configuring Local Alarms			5-1
	5.1	Introduction		5-1
	5.2	Procedure		5-1
6.	Viewing Process Values and Changing Setpoint			6-1
	6.1	Introduction		6-1
	6.2	Viewing PV and SP in the Main Window		6-2
	6.3	Viewing PV and SP in a Graph		6-3
	6.4	Changing the Setpoint Using the Setpoint Dialog Box		6-4
	6.5	Configuring and Invoking the Single-Step Ramp Function		6-5
7.	Changing Controller Mode and Using Autotune			7-1
	7.1	Introduction		7-1
	7.2	Procedure		7-1
8.	Viewing and Changing Controller Configuration Parameters			8-1
	8.1	Introduction		8-1
	8.2	Accessing Configuration Parameter Displays		8-12
	8.3	Using Configuration Parameter Displays		8-3
9.	Configuring and Running Ramp and Soak Recipes			9-1
	9.1	Introduction		9-1
	9.2	Configuring CN8-SW Recipes		9-2
	9.2.1 Creating a New Recipe			9-2
	9.2.2 Editing an Existing Recipe			9-4
	9.3	Running CN8-SW Recipes		9-5
	9.3.1 Starting to Run a Recipe			9-5
	9.3.2 Holding (Pausing) Recipe Execution			9-6
	9.3.3		Resuming Recipe Execution	9-7
	9.3.4		Stopping Recipe Execution	9-8
	9.4	Configuring Controller Ramp and Soak Parameters		9-9
	9.5	Running Controller Ramp and Soak Cycles		9-12
10. Storing and Loading Controller Configurations				10-1

ii © Omega Engineering 900M048U00 REVISION ÒBÓ