CN8-SWUserÕs Guide

Options Menu

Function

Purpose

Section

 

 

 

Communications

Access the window used to specify PC port and

4.4

 

communication parameters to be used by the CN8-SW

 

 

software. These parameters will override (but not

 

 

change) the communication settings in your operating

 

 

system for the selected port.

 

 

 

 

Logging

Access the window used to specify the time interval at

11

[Stop Logging]

which PV and SP for all controllers should be written to a

 

 

log file, name the file, and turn on logging. When logging

 

 

is active, this menu item becomes Stop Logging.

 

 

 

 

Start Find Controllers

Start the process used by the CN8-SW software to poll

4.4.2

[Stop Find

each possible address on the network to see if there is a

 

Controllers]

controller at that address. When this process is active,

 

 

this menu item becomes Stop Find Controllers. The

 

 

alternative to using this automatic process to enable the

 

 

CN8-SW computer to recognize controllers is to recognize

 

 

controllers one at a time using the Controller menu Add

 

 

function.

 

 

 

 

Ramp/Soak Menu

Function

Purpose

Section

 

 

 

 

New

Access the window used to begin the process of

9.2.1

 

configuring a new ramp and soak recipe to be executed

 

 

under the direction of CN8-SW.

 

 

 

 

Edit

Access the window used to select an existing recipe (on

9.2.2

 

any accessible drive) for edit.

 

 

 

 

Run

Access the window used to select an existing recipe to

9.3.1

 

run on one or more controllers.

 

 

 

 

Hold

Access the window used to hold (pause) execution of an

9.3.2

 

active (running) recipe on one or more controllers. While

 

 

a controller is in hold, its setpoint will not be changed.

 

 

 

 

Resume

Access the window used to resume (continue) execution

9.3.3

 

of a ÒheldÓ recipe in one or more controllers.

 

 

 

 

Stop

Access the window used to stop (terminate) the execution

9.3.3

 

of an active or ÒheldÓ recipe in one or more controllers.

 

 

 

 

Help Menu

Function

Purpose

Section

 

 

 

 

About CN8-SW

Access CN8-SW version information. If you phone for

--

 

technical support, be ready to supply this number.

 

 

 

 

1-10

Page 15
Image 15
Omega Engineering #M3350/0101 manual Options Menu, Ramp/Soak Menu, Help Menu