Installing the Software and Logging In

The access privilege categories grant the following permissions.

Change Setpoint Change the setpoint using the Change Setpoint window (see Section 6), change the controller mode (see Section 7), and run ramp/soak recipes under the direction of CN8-SW or under the direction of the controller (see Section 9).

View/Change Parameters Use the CN8-SW parameter window to view and change the parameters stored in the controllersÕ non- volatile memory (see Section 8).

Controller Configuration Add and delete controllers from the CN8-SW system (see Section 4).

Super User Add and delete user accounts (operator login IDs) (see 3.5.2).

3.5.2 Procedure

To add an operator login account:

1.While logged in as MULTI, select Edit Operators. The Operator Setup window will open.

2.Click on New. The Operator window used to define a new login account will be displayed.

3.Enter the new User ID (0 to 10 letters and/or numbers).

4.Enter a password (optional, but recommended).

3-7

Page 28
Image 28
Omega Engineering #M3350/0101 manual Procedure, To add an operator login account