
Set these values only if the alert forwarding functions are not working properly. Each string that is marked with an asterisk (*) must have a carriage return (^M) manually entered at the end of the field value.
The following table describes the initialization strings for this modem.
Table 6. Port 1 settings
Field | What you type |
|
|
Initialization | Type the initialization string that will be used for the specified modem. A |
string* | default string is provided (ATE0). Do not change this string unless your |
| |
|
|
Dial prefix string | Type the initialization string that is used before the number that is to be |
| dialed. The default is ATDT. |
|
|
Hangup string* | Type the initialization string that will be used to instruct the modem to |
| disconnect. A default string is provided (ATH0). Do not change this string |
| unless your |
|
|
Dial postfix | Type the initialization string that is used after the number is dialed to tell |
string* | the modem to stop dialing. The default is ^M. |
|
|
Modem query* | Type the initialization string that is used to find out whether the modem is |
| attached. The default is AT. |
|
|
Factory settings | Type the initialization string that returns the modem to its factory settings |
string* | when the modem is initialized. The default is AT&F0. |
|
|
Auto answer* | Type the initialization string that is used to tell the modem to answer the |
| phone when it rings. The default is to answer after one ring, ATS0=1. |
|
|
Escape string | Type the initialization string that returns the modem to command mode |
| when it is currently communicating with another modem. The default is |
| +++. |
|
|
Auto answer | Type the initialization string that is used to tell the modem to stop |
stop* | answering the phone automatically when it rings. The default is ATS0=0. |
|
|
Caller ID string | Type the initialization string that will be used to get caller ID information |
| from the modem. |
|
|
32 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide