IBM Remote Supervisor Adapter II manual Portcfg command

Option	Description
-exp	Maximum password age [0 - 365] days. Set to 0 for no expiration.
-cnt	Number of previous passwords that cannot be reused [0 - 5]
-nul	Allows accounts with no password [yes no]
-h	Displays the command usage and options

Example

x345RSA> passwordcfg Security Level: Legacy x345RSA> passwordcfg -exp 365 ok

x345RSA> passwordcfg -nul yes ok

x345RSA> passwordcfg -cnt 5 ok

x345RSA> passwordcfg Security Level: Customize -exp: 365

-cnt: 5

-nul: allowed

portcfg command

Note: The portcfg command is not available for the Remote Supervisor Adapter II SlimLine.

Syntax

portcfg com1 [options] portcfg com2 [options] options:

-serredserial_redirect_mode -bbaud_rate

-pparity

-sstop_bits

-climode cli_mode -cliauth cli_auth

Description

Use the portcfg command to configure the serial port. Type portcfg com1 or portcfg com2 to display the port configuration. To change the serial port configuration, type the options, followed by the values. To change the serial port configuration, you must have at least Adapter Networking and Security Configuration authority.

The following table shows the arguments for the options.

Option	Description	Values
-serred	Serial redirect mode	disabled, enabled
-b	Baud rate	2400, 4800, 9600, 19200, 38400, 57600, 115200
-p	Parity	none, odd, even, mark, space
-s	Stop bits	1, 2

Chapter 6. Command-line interface 103