IBM Remote Supervisor Adapter II ntp command, passwordcfg command, Syntax, Description, Example

ntp command

Syntax

ntp [options] options:

-enstate

-ihostname -ffrequency -synch

Description

Use the ntp command to display and configure the Network Time Protocol (NTP).

The following table shows the arguments for the options.

Option	Description	Values
-en	Enables or disables the	Enabled, disabled
	Network Time Protocol
-i	Name or IP address of the	The name of the NTP server to be used
	Network Time Protocol	for clock synchronization.
	server
-f	The frequency (in minutes)	1 to 65535
	that the Remote Supervisor
	Adapter II clock is
	synchronized with the
	Network Time Protocol
	server
-synch	Requests an immediate	No values are used with this parameter.
	synchronization with the
	Network Time Protocol
	server

Example

x345RSA> ntp -en: disabled -f: 1 minute -i: not set

passwordcfg command

Syntax

passwordcfg [options]

options: {-high}{-legacy}{-exp-cnt-nul} -legacy

-high -exp: -cnt: -nul: -h

Description

Use the passwordcfg command to display and configure the password parameters.

Option	Description
-legacy	Sets account security to a predefined legacy set of defaults
-high	Sets account security to a predefined high set of defaults

102 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide